Mechanical Engineering Technology

Books

Study, N. E., & Simmers, C. L., (2013). Capstone Projects in Engineering Design (working title). Columbus, OH. McGraw-Hill.

Bertoline, G. R., Wiebe, E. N., Hartman, N. W., Ross, W. A., Study, N. E., & Simmers, C. L. (2013). Engineering Design. Columbus, OH. McGraw-Hill. ISBN 0-07-8694191

Harms, H. R., & Janosz, D. A. (2012). Pre-Engineering. Columbus, OH. McGraw-Hill. ISBN 978-0-07-878336-4 (Contributing author)

Refereed Journal Publications

Study, N. E. (2011). Long-term impact of improving visualization abilities of minority engineering and technology students: preliminary results. The Engineering Design Graphics Journal, 75 (2).

Veurink, N. L, Hamlin, A. J., Kampe, J. C. M., Sorby, S. A., Blasko, D. G., Holliday-Darr, K. A., Trich Kremer, J. D., Harris, K. S., Harris, L. V., Connolly, P. E., Sadowski, M. A., Brus, C. P., Boyle, L. N., Study, N. E., Knott, T. W. (2009). Enhancing Visualization Skills-Improving Options aNd Success (EnViSIONS). The Engineering Design Graphics Journal, 73 (2) 1-17.

Study, N. E. (2006). Assessing and improving the below average visualization abilities of a group of minority engineering and technology students. Journal of Women and Minorities in Science and Engineering, 12 (4) 363-374.

Study, N. E. (2003). Haptic abilities of freshman engineers as measured by the haptic visual discrimination test. The Engineering Design Graphics Journal, 67 (2), 29-34.

Study, N. E. (2002). The effectiveness of using the successive perception test I to measure visual-haptic tendencies in engineering students. The Engineering Design Graphics Journal, 66 (2), 17-26.

Birchman, J. A. & Study, N. E. (2001). Preparing class materials for the web using PDF format. The Engineering Design Graphics Journal, 65 (3), 25-30.

Conference Presentations and Proceedings

Study, N. E. (2012). An overview of tests of cognitive spatial ability. Procedings of the ASEE Engineering Design Graphics Division Mid-year Meeting. Galveston, TX.

Simmers, C. L., and Study, N. E. (2011) Project-based + hybrid learning = ready for postsecondary education. Presentation at ACTE 2011 Convention. St. Louis, MO.

Study, N. E. (2011). Long-term impact of improving visualization abilities of minority engineering and technology students. Proceedings of the ASEE Annual Conference & Exposition. Vancouver, BC.

Chin, R. A., and Study, N. E. (2010). Keys to publishing in peer reviewed journals. Poster Session at the 9th Annual ASEE Global Colloquium on Engineering Education. Singapore.

Study, N. E. (2010). Long-term impact of improving visualization abilities of minority engineering and technology students: preliminary results. Proceedings of the ASEE Engineering Design Graphics Division Mid-year Meeting (132-137). Houghton, MI.

Chin, R. A., Holliday-Darr, K., and Study, N. E. (2010). Getting started publishing in the online EDGJ. Media Showcase Presentation at ASEE Engineering Design Graphics Division Mid-year Meeting. Houghton, MI.

Chin, R. A., and Study, N. E. (2010). Keys to publishing in peer reviewed journals. Proceedings of the ASEE Annual Conference & Exposition. Louisville, KY.

Study, N. E., and Chin, R. A. (2010). Manuscript publication aided by the Open Journal Systems: A case study. Proceedings of the ASEE Southeastern Section Annual Conference. Blacksburg, VA.

Study, N. E. (2009). Correlation of haptic abilities and improvement of visualization skills in a sample of minority engineering and technology students. Proceedings of the ASEE Engineering Design Graphics Division Mid-year Meeting (140-143). Erie, PA.

Study, N. E. (2009). The submission and reviewing process in the online Engineering Design Graphics Journal. Proceedings of the ASEE Engineering Design Graphics Division Mid-year Meeting (40-42).Erie, PA.

Study, N. E. (2009). EnViSIONS at Virginia State University. Proceedings of the ASEE Engineering Design Graphics Division Mid-year Meeting. Berkeley, CA.

Study, N. E. (2008). The haptic abilities of engineering and technology students with below average visualization abilities. Accepted for presentation at the 6th Annual ASEE Global Colloquium on Engineering Education. Cape Town, South Africa.

Study, N. E. (2008). Testing the haptic abilities of a sample of minority engineering and technology students. Proceedings of the ASEE Annual Conference & Exposition. Pittsburg, PA.

Study, N. E. (2007). Testing the haptic abilities of minority engineering & technology students: Preliminary results. Proceedings of the ASEE Engineering Design Graphics Division Mid-year Meeting. VA Beach, VA.

Study, N. E. (2006). Using remediation to improve visualization abilities in minority engineering and technology students. Poster session presented at the 5th Annual ASEE Global Colloquium on Engineering Education. Rio de Janeiro, Brazil.

Study, N. E. (2006). Using remediation to improve visualization abilities in minority engineering and technology students. Proceedings of the ASEE Annual Conference & Exposition. Chicago, IL.

Study, N. E. (2005). Improving visualization abilities in minority engineering and technology students: Preliminary results. Proceedings of the ASEE Engineering Design Graphics Division Mid-year Meeting (9-12). Ft. Lauderdale, FL.

Study, N. E. (2005). Using LEGOs® to reinforce basic parametric modeling practices. Proceedings of the ASEE Annual Conference & Exposition. Portland, OR.

Study, N. E. (2004). Implementing a real world project into a senior level architectural drafting course. Proceedings of the ASEE Engineering Design Graphics Division Mid-year Meeting (44-49). Williamsburg, VA.

Study, N. E. (2004). Assessing visualization abilities in minority engineering students. Poster session presented at the ASEE 3rd International Colloquium on Engineering Education. Beijing, China.

Study, N. E. (2004). Assessing visualization abilities in minority engineering students. Proceedings of the ASEE Annual Conference & Exposition. Salt Lake City, UT.

Study, N. E. (2003). A comparison of test scores of minority vs. non-minority students on the Purdue spatial visualization test: Visualization of rotations. Proceedings of the ASEE Engineering Design Graphics Division Mid-year Meeting (182-188). Phoenix, AZ.

Study, N. E. (2002). The haptic visualization tendencies of freshman engineering students and their implication on testing and instruction. Proceedings of the ASEE Engineering Design Graphics Division Mid-year Meeting. Indianapolis, IN.

Birchman, J. A. & Study, N. E. (2001). Preparing class materials for the web using PDF format. Proceedings of the ASEE Engineering Design Graphics Division Mid-year Meeting (181-188). San Antonio, TX.

The Case Studies for Kids Project: The center for twenty-first century conceptual tools (TCCT). (2000). Poster session presenting Model Eliciting Activities to teachers. Purdue University.

Study, N. E. (1998). Parametric vs. non-parametric modeling. Presentation, 4-State Technology Conference. Pittsburg State University.

Study, N. E. (1998). 3D CAD in the classroom. Presentation, MVA/MITEA Summer Conference. Southwest MO State University.

Study, N. E. (1997). Visualization for CAD solid modeling. Presentation, 4-State Technology Conference, Pittsburg State University.

Expanding Your Horizons Conference. (1995-1997). Career and college planning workshops for junior high school girls. Southwest MO State University.

Articles published in refereed journals

Khalilollahi, A., Johnson, D. H., and Roth, J. T., “A comparative multi-field FEA and experimental study on the enhanced manufacturability of 6061-T6511 aluminum using dc current,” Transactions, American Society of Mechanical Engineers, Journal of Manufacturing Science and Engineering, vol. 131, 064503-1 – 064503-5, December 2009.

Kronenberger, T. J., Johnson, D. H., and Roth, J. T., “Coupled multifield finite element analysis model of upsetting under an applied direct current,”  Transactions, American Society of Mechanical Engineers, Journal of Manufacturing Science and Engineering, vol. 131/031003-1, June 2009.

Johnson, D. H., and Englund, R. B., “Finite element analysis of a threaded connection supported by experimental and theoretical research,” Journal of Engineering Technology, vol. 14, no. 2, pp. 42-47, 1997.

Johnson, D. H., and Roth, D. E., “Finite element analysis in engineering technology,” Journal of Engineering Technology, vol. 5, no. 4, pp. 8-11, 1995.

Johnson, D. H., “Finite element analysis applications in undergraduate engineering,” Computers in Education Journal, vol. 5, no. 4, pp. 40-44, 1995.

Johnson, D. H., “Customizing the UADAPT macro of the ANSYS program,” ANSYS TechNotes, no. 11, pp. 11.1.1-11.1.11, June 1993. [Invited author]

Rajakumar, C., and Johnson, D. H., “Finite element predictions of free convection heat transfer coefficients of simulated electronic circuit boards,” American Society of Mechanical Engineers Journal of Electronic Packaging, vol. 3, no. 2, pp. 129-134, 1989.

Rajakumar, C., Johnson, D. H., and Finkel, J. I., “Buoyancy-induced flow computations in electronic packaging using the ANSYS program,” ANSYS TechNotes, no. 2, pp. 2.4.1-2.4.17, 1988.

Panzer, L. H., and Johnson, D. H., “Casting solidification: Residual stress and permanent distortion,” ANSYS TechNotes, no. 3, pp. 3.3.1-3.3.31, 1998.

Johnson, D. H., “Torsion Analysis with ANSYS Thermal Analogy,” ANSYS TechNotes, no. 1, pp. 1.3.1-1.3.26, 1987.

Articles published in refereed proceedings

Johnson, D. H. and Roth J. T., “FEA Simulation Technique for Coupled Field Analysis of Metal Forming Under an Applied Direct Current,” [poster presentation] 2009 International Manufacturing Science and Engineering Conference, MSEC2009-84388, West Lafayette, IN, Oct 2009.

Khalilollahi, A., Johnson, D., and Roth, J., “Evaluation of current density temperature and deformations in sheet metal strip and dome height tests,” 2008 International ANSYS Conference, 20 slides, Pittsburgh, PA, August 2008.

Kronenberger, T. J., Johnson, D. H., and Roth, J.T., “Coupled multifield finite element analysis model of upsetting under an applied direct current,” Proceedings of MSEC2007, 2007 ASME International Conference on Manufacturing Science and Engineering, MSEC2007-31203, October 15-18, 2007.

Kronenberger, T. J., Khalilollahi, A., Johnson, D. H., and Roth, J. T., “Multi-field FE modeling of resistive heating in Ti-6Al-4V specimens,” Proceedings, 21st Canadian Congress of Applied Mechanics-CANCAM, pp. 635-636, June 2007.

Khalilollahi, A., Roth, J. T., and Johnson, D., “Multi-field FE modeling of resistive heating in a 6061-T6511 aluminum specimen,”2006 American Society of Mechanical Engineers-International Mechanical Engineering Congress and Exposition, IMECE2006-15677, 10 pp., 2006.

Johnson, David H., “ANSYS workbench environment in education,” Proceedings, 2006 International ANSYS Conference and Exposition (peer reviewed), Pittsburgh, PA, May 2-4, 2006.

Roth, J. T., Khalilollahi, A., and Johnson, D. H., “Multi-field FE modeling of resistive heating in a 6061-T6511 aluminum specimen”, Proceedings of IMECE: ASME International Mechanical Engineering Congress and Exhibition, IMECE2006-15677, Chicago, IL, November 5-10, 2006.

Englund, R., Sweeney, S., and Johnson, D., “A demonstration of heat affected zone from welding,” 2005 ASEE Annual Conference and Exposition, session 1150, Portland, OR, 9 pp., June 2005.

Johnson, D. H., and Englund, R. B., “Mechanical stress relief simulation,” Proceedings, 2004 International ANSYS Conference & Exposition, Pittsburgh, PA, 13 pp., May 2004.

Sweeney, S. K., Johnson, D. H., and Turso, J. A., “Development of a mechanical vibrations course for engineering technologists,”Proceedings, 2003 American Society for Engineering Education (IEEE) Annual Conference & Exposition, session 2648, Nashville, TN, 13 pp., June 2003.

Johnson, D. H., “Principles of simulating contact between parts with ANSYS, Part 2,” International ANSYS Conference and Exposition, PDF file on CD, 12 pp., 2002.

Dropik, M. J., Johnson, D. H., and Roth, D. E., “Developing an ANSYS creep model for polypropylene from experimental data,”International ANSYS Conference and Exposition, PDF file on CD, 13 pp., 2002.

Johnson, D. H., “Principles of simulating contact between parts with ANSYS,” Mallett Technology’s ANSYS Users’ Conference, 6 pp., October 2, 2001.

Torres, K., Holliday-Darr, K., Forsman, D., Baird, D., and Johnson, D., “Tech prep camp: Introducing high school students to engineering technology through model rocketry,” American Society of Engineering Educators, National Conference, session 3253, 11 pp., June 19-21, 2000.

Johnson, D. H., and Pal, D., “Simulation of an ultrasonic piezoelectric transducer,” International ANSYS Conference and Exposition, 5 pp., August 28-30, 2000.

Johnson, D. H., Englund, R. B., McAnlis, B. C., Sari, K. C., and Columbet, D., “Three-dimensional modeling of a bolted connection,” International ANSYS Conference and Exposition, 6 pp., August 28-30, 2000.

Englund, R. B., Johnson, D. H., and Sweeney, S. K., “A finite element analysis study of non-linear behavior in a bolted connection,” American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, DE-Vol.102:73-79, November 1999.

Johnson, D. H., and Heald, E. E., “Design of experiments methods for a nonlinear buckling FEA study,” International ANSYS Conference and Exhibition, vol. 1, pp. 513-520, 1998.

Johnson, D. H., and Fisher, K. J., “Design of a robotic gripper for an automated forge press,” ASME Technical Paper 97-WA/MET-8, 1997 International Mechanical Engineering Congress & Exposition, pp. 1-10, November 1997.

Johnson, D. H., “Open section buckling study using design of experiments and response surface methodology techniques,”ASME Technical Paper 97-WA/MET-6, 1997 International Mechanical Engineering Congress & Exposition, vol. 14, no. 2, pp. 42-48, 1997.

Heald, E. E., and Johnson, D. H., “Heat transfer in finned aluminum heat sinks by ANSYS, FLOTRAN and experimental methods,” International ANSYS Conference, vol. 2, no. 2, pp. 353-259, 1996.

Fisher, K. J., Farrell, R. E., and Johnson, D. H., “Rotational mold system having energy storage and recovery,” American Society of Mechanical Engineers International Mechanical Engineering, Congress 1996, 96-WA/MET-4, pp. 1-6, 1996.

Heald, E. E., Horne, E., and Johnson, D. H., “Not so simple heat transfer for finned heat sinks,” International ANSYS Conference 1994, vol. 1, pp. 3:73-3:84, 1994.

Heald, E. E., Horne, E., and Johnson, D. H., “Not so simple heat transfer for finned heat sinks,” 1995 ANSYS Conference in Japan, pp. 35-59, 1995.

Heald, E. E., Horne, E., and Johnson, D. H., “Not so simple heat transfer for finned heat sinks,” 1995 ANSYS Conference in Korea, pp. 1-25, 1995.

Rajakumar, C., and Johnson, D. H., “Investigations of free convection heat transfer in electronic packaging using the ANSYS finite element program,” International ANSYS Conference, pp. 44-55, 1987.

Rajakumar, C., and Johnson, D. H., “Finite element predictions of free convection heat transfer coefficients of simulated electronic circuit boards,” American Society of Mechanical Engineers Winter Annual Meeting, pp. 1-8, 1987.

Johnson, D. H., “Finite element design optimization of the WABCO 170 ton Haulpak truck frame,” Society of Automotive Engineers Earthmoving Industry Conference, SAE paper 860748, pp. 1-4, 1986.

Books

Johnson, D. H., Heald, E. E., and Roth, D. E., Heat Transfer Users Guide for ANSYS 5.1, ANSYS, Inc., 578 pp., 1995. [Principal author]

Johnson, D. H., Substructuring User's Guide, Swanson Analysis Systems, Inc., 338 pp., 1993.

Johnson, D. H., Substructuring with the ANSYS Program, Swanson Analysis Systems, Inc., 330 pp., 1991.

Johnson, D. H., Postprocessing, Swanson Analysis Systems, Inc., 103 pp., 1989.

Johnson, D. H., 2D Fluid Flow Element (STIF15), Swanson Analysis Systems, Inc., 53 pp., 1987.

Book reviews

Reviewed textbook, ANSYS Heat Transfer Training Manual, Release 5.5, November 1998.

Chapter 2 of Computer Visualization, eds. R.S. Gallagher, CRC Press, Inc., included in the "Acknowledgment" on page xi,January 1995.

Articles published in nonrefereed journals

Johnson, D. H., Logan, C., and Roberts, R., “Vaporization rates for rolling oil using computer simulations improves safety in coil/foil annealing,” Light Metal Age, pp. 44-47, June 2005.

Johnson, D. H., “3D Modeling of a Bolted Connection: An Exercise in  Mapped Meshing and Patience,” SoftWords Newsletter, published by Ohio Computer Aided Engineering, Inc. and Advanced Engineering Technology, vol. 22, 1st Quarter, 2pp., 2002.

Johnson, D. H., “Out of This World Analysis,” SoftWords Newsletter,  published by Ohio Computer Aided Engineering, Inc. and Advanced  Engineering Technologies, vol. 24, 3rd Quarter, 2 pp., 2002.

Johnson, D. H., “Graphics tip,” ANSYS News, Third Issue, pp. 27, 1990.

Rogers, C. R., and Johnson, D. H., “New substructure interface,” ANSYS  News, Third Issue, pp. 24, 1990.

Johnson, D. H., “Command abbreviations in ANSYS 4.4A,” ANSYS News, Third Issue, pp. 9, 1990.

Johnson, D. H., “Graphics setup using macros,” ANSYS News, Fourth issue, pp. 11, 1990.

Johnson, D. H., and Lesko, J., “Tektronix terminal setting after exiting ANSYS,” ANSYS News, Third Issue, pp. 12-13, 1989.

Johnson, D. H., “User's update - Estimating solution file sizes for ANSYS 4.3, ANSYS News, Third Issue, pp. 11, 1988.

Johnson, D. H., “User's update - ANSYS rev. 4.3 graphics,” ANSYS News, Third Issue, pp. 6-7, 1987.

Johnson, D. H., “Graphics update,” ANSYS News, Fifth Issue, pp. 6, 1987.

Articles published in refereed journals

Dave, V., Blasko, D., Holliday-Darr, K., Trich Kremer, J., Edwards, R., Ford, M., Lendhardt, L., and Hido, B., “Re-enJEANeering STEM Education: Math Options Summer Camp,” Journal of Technology Studies, vol. 36, no. 1, pp. 35-45, Spring 2010.

Edwards, R., Recktenwald, G., Kuntz, R. and Michael, R., “An Exercise to Teach the First Law of Thermodynamics for an Open System Using a Simple Hair Dryer,” the Technology Interface Journal, The Electronic Journal for Engineering Technology (http://technologyinterface.nmsu.edu/Spring10/, peer reviewed, on-line journal), ISSN# 1523-9926, vol. 10, no. 3, 20 pp., Spring 2010.

Meckley, J., and Edwards, R., “A study on the design and effectiveness of conformal cooling channels in rapid tooling inserts,” the Technology Interface Journal, The Electronic Journal for Engineering Technology (http://technologyinterface.nmsu.edu/Fall09/, peer reviewed, on-line journal), vol. 10, no. 1, 28 pp., Fall 2009.

Edwards, R. C., “Mechanical engineering technology senior projects-Partnering with industry to enhance the students’ capstone experience,” the Technology Interface, 12 pp., Fall 2006.

Articles published in refereed proceedings

Edwards, R. and Lobaugh, M., “Mini-Projects as Part of a Freshman Seminar For Mechanical Engineering Technology Students,” Proceedings, American Society for Engineering Education Annual Conference and Exposition, AC 2011-2118, Vancouver, BC, June 2011.

Lobaugh, M. and Edwards, R, “Mechatronics for Non-Electrical Engineers,” Proceedings, American Society for Engineering Education Annual Conference and Exposition, AC 2011-2042, Vancouver, BC, June 2011.

Edwards, R. and Demetrio, T. and Johnson, D., “Resurrecting the Electrolytic Plotting Tank,” Proceedings, American Society for Engineering Education Annual Conference and Exposition, AC 2011-1819, Vancouver, BC, June 2011.

Recktenwald, G., and Edwards, R., “Guided Inquiry Laboratory Exercises Designed to Develop Qualitative Reasoning Skills in Undergraduate Engineering Students,” Proceedings, 40th ASEE/IEEE Frontiers in Education Conference, Washington, DC, October 2010.

Edwards, R. C., and Recktenwald, G., “A Guided Inquiry Approach to Teaching Fan Selection,” Proceedings, American Society for Engineering Education National Conference, Louisville, KY, 2010.

Edwards, R. C., Holliday-Darr, K. and Ford, M., “Undergraduate Involvement in Developing K-12 Hands-On Activities,” Proceedings, American Society for Engineering Education National Conference, Louisville, KY, 2010.

Recktenwald, G., and Edwards, R. C., “Student Attitudes Toward Inquiry-Based Exercises in Undergraduate Lab Courses,” Proceedings, American Society for Engineering Education National Conference, Louisville, KY, 2010.

Recktenwald, G., and Edwards, R. C., “An Inquiry-Based Exercise Involving a Tank of Water with a Hole in its Side,” Proceeding, American Society for Engineering Education National Conference, Louisville, KY, 2010.

Edwards, R. and Recktenwald, G., “Teaching the First Law of Thermodynamics for an Open System Through an Apparent Contradictory Experiment,” Proceedings, American Society for Engineering Education St. Lawrence Section Conference, [CD format], Rochester, NY, March 2010.

Recktenwald, G. W., Edwards, R. C., Howe, D., and Faulkner, J., “A Simple Experiment to Expose Misconceptions About the Bernoulli Equation,” Proceedings, IMECE 2009, 2009 ASME International Mechanical Engineering Congress and Exposition, 10 pp., Lake Buena Vita, FL, November 2009.

Edwards, R. C., "Freehand sketching in the curricula - A view from the outside," Proceedings, 64th EDGD Mid-Year Conference, Erie, PA, 2009.

Edwards, R. C., Recktenwald, G., and Benini, B., “A laboratory exercise to teach the hydrostatic principle as a core concept in fluid mechanics,” Proceedings, American Society for Engineering Education National Conference, AC 2009-251, Austin, TX, 2009.

Edwards, R. C. and Recktenwald, G., “Simple experiments for the thermal and fluid sciences,” Proceedings, American Society for Engineering Education National Conference, AC 2009-712, Austin, TX, 2009.

Recktenwald, G., Edwards, R. C., Howe, D., Faulkner, J., and Hsieh, C., “The engineering of everyday things: Simple experiments in the thermal and fluid sciences,” Proceedings, American Society for Engineering Education National Conference, AC 2009-704, 9 pp., Austin, TX, 2009.

Hsieh, C., Recktenwald, G., and Edwards, R., “Implementing inquiry-based experiments in a fluid science laboratory class,” Proceedings of the American Society for Engineering Education National Conference, AC 2008-1351, 21 pp., 2008.

Edwards, R. C. and Recktenwald, G., “Guided inquiry in an engineering technology classroom,” Proceedings of the American Society for Engineering Education National Conference, AC 2008-293, 9 pp., 2008.

Edwards, R. C., “A homemade 2-dimensional thermal conduction apparatus designed as a student project,” Proceedings of the American Society for Engineering Education National Conference, AC 2008-292, 9 pp., 2008.

Meckley, J., and Edwards, R. C., “A study of the mold thermal characteristics of cooling lines in conventional and rapid tooling,” Society of Plastics Engineers Annual Technical Conference (ANTEC), pp. 1572-1576, 2008.

Meckley, J. A., and Edwards, R. C., “A study of the effect of conformal cooling on part temperature,” Society of Plastics Engineers Annual Technical Conference (ANTEC), pp. 483-488, 2008. [best paper award]

Edwards, R., Teaching core concepts in thermal and fluid sciences using devices familiar to the student, Proceedings of the American Society for Engineering Education (ASEE), (http://asee.morrisville.edu/), Session 1-1, 10 pp., 2007.

Rectenwald, G., and Edwards, R. C., Using simple experiments to teach core concepts in the thermal and fluid sciences, Proceedings of the American Society for Engineering Education National Conference, AC 2007-2294, 2007. [Best Paper Award]

Edwards, R. C., A laboratory exercise to demonstrate how to experimentally determine the operating point for a fan, Proceedings of the American Society for Engineering Education National Conference, AC 2007-206, 2007.

Edwards, R. C., Using a homemade low speed wind tunnel to illustrate the continuity equation, Proceedings of the American Society for Engineering Education National Conference, AC 2007-1004, 2007.

Sweeney, S. K., Englund, R. B., and Edwards, R. C., Direct assessment of mechanics of material learning with concept inventory, Proceedings of the American Society for Engineering Education National Conference, AC 2007-569, 2007.

Edwards, R. C., “Using laboratory experiences to facilitate the teaching of heat transfer to electrical engineering students,” Proceedings of the American Society for Engineering Education Regional Conference, Ithaca, NY, 7 pp., 2006.

Edwards, R. C., “Mechanical engineering technology senior projects-An industry-education partnership,” Proceedings of the American Society for Engineering Education Regional Conference, Kansas City, MO, 9 pp., 2006.

Edwards, R. C., “Teaching thermal management to electrical technology students,” American Society for Engineering Education Regional Conference, 6 pp., 2005.

Edwards, R., Dropik, M., and Simoneau, R., “Using available faculty expertise to add relevance to a first course in heat transfer,” American Society for Engineering Education Annual Conference and Exposition, Session #2266, 7 pp., 2005.

Edwards, R. C., “A simple hairdryer experiment to demonstrate the first law of thermodynamics,” American Society for Engineering Education Annual Conference and Exposition, Session #1348, 9 pp., 2005.

Edwards, R. C., “Improving a fluid and thermal sciences course for Electrical Engineering Technology students,” ASEE Regional Conference, Milwaukee, WI, 2004.

Edwards, R. C., and Forsman, D. R., “A rapid prototyping application in wind tunnel testing-a student project,” American Society for Engineering Education Annual Conference and Exposition, Session #3550, 6 pp., 2002.

Articles published in refereed proceedings

Evans, E., and Englund, R., “A bridge to high-school girls: A versatile recruiting tool,” 2001 ASEE Annual Conference and Exposition Proceedings, Session 3550, 6 pp., June 2001.

Evans, E., Holliday-Darr, K., Young, J., Lasher, W., Beaumont, J., Ford, R., Khalilollahi, A., and Hemminger, T., “An innovative approach to incorporating design into the freshman year,” 1995 ASEE Annual Conference and Exposition Proceedings, pp. 2050-2059, June 1995.

Books

Doepker, P.E., Evans, E., MacLellan, P. T., and Plescia, D., Statics – Facilitator Guide, Sinclair Community College, 171 pp., 2004.

Doepker, P.E., Evans, E., MacLellan, P. T., and Plescia, D., Statics – Participant Journal, Sinclair Community College, 133 pp., 2004.

Doepker, P.E., Evans, E., MacLellan, P. T., and Plescia, D., Strength of Materials – Facilitator Guide, Sinclair Community College, 235 pp., 2004.

Doepker, P.E., Evans, E., MacLellan, P. T., and Plescia, D., Strength of Materials – Participant Journal, Sinclair Community College, 197 pp., 2004.

Articles published in nonrefereed journals

Evans, E., “Solid models, virtual inspection and the position tolerance,” ASEE Engineering Design Graphics Division Proceedings 59th Annual Midyear Meeting, pp. 153-158, November 2004.

Evans, E., “The role of descriptive geometry in a mechanical engineering technology curriculum,” ASEE Engineering Design Graphics Division 1997 Mid-Year Conference Proceedings, pp. 123-129, October 1997.

Articles published in refereed journals

Fisher, K. J., Lobaugh, M., and Parente, D. H., “An Assessment of Desired ‘Business Knowledge Attributes’ for Engineering Technology Graduates,” Journal of Engineering Technology, vol. 23, no. 2, pp. 10-15, Fall 2006.

Fisher, K. J., Lobaugh, M., Michael, R. M., Sweeney, S. K., and Kuvshinikov, P. J., “Development of a Cost Model for Manual Tool Polishing,” The International Journal of Modern Engineering (http://www.ijme.us, an international peer reviewed online journal), Spring/Summer 2006.

Articles published in refereed proceedings

Edwards, R. and Lobaugh, M., “Mini-Projects as Part of a Freshman Seminar For Mechanical Engineering Technology Students,” Proceedings, American Society for Engineering Education Annual Conference and Exposition, AC 2011-2118, Vancouver, BC, June 2011. [Principal author, presented at conference by Edwards]

Lobaugh, M. and Edwards, R, “Mechatronics for Non-Electrical Engineers,” Proceedings, American Society for Engineering Education Annual Conference and Exposition, AC 2011-2042, Vancouver, BC, June 2011. [Co-author, presented at conference by Edwards]

Lobaugh, M., “The Value of Value Stream Mapping to Students,” American Society for Engineering Education, AC-2008-2740, Pittsburgh, PA, 2008. [Presented at conference]

Lobaugh, M., “Lean Manufacturing; A Unique Approach to Educating Students,” American Society for Engineering Education National Conference, CD Index number 3663, 9 pp., Portland, OR, June 2005. [Presented at conference]

Lobaugh, M., “Revving Up Interest in Hands-on Engineering,” American Society for Engineering Education National Conference, Session #3663, CD Index number 2547, 7 pp., Portland, OR, June 2004. [Presented at conference]

Holliday-Darr, K., and Lobaugh, M., “’Sprint’ Your Way Through Pro/E,” 58th Annual Engineering Design Graphics Division of American Society for Engineering Education Conference, 7 pp., Scottsdale, AZ, November 2003. [Co-author, presented at conference by Holliday-Darr]

Holliday-Darr, K., and Lobaugh, M., “Graphic Claymation Visualization Through Sight and Touch,” American Society for Engineering Education National Conference, CD Index number 2077, Nashville, TN, 6 pp., June 2003. [Co-author, presented at conference by Holliday-Darr]

Forsman, D., Holliday-Darr, K., and Lobaugh, J. “Process Education in Computer Graphics,” American Society for Engineering Education National Conference, CD Index number 1338, 14 pp., Montreal, Quebec, Canada, June 2002. [Co-author, presented at conference]

Articles published in refereed proceedings

Nitterright, F., Michael, R., Murosky, C., Ragen, M., “Undergraduate Design: Design of a Reusable Stir Friction Welding Tool,” Proceedings, American Society of Engineering Educators, AC 2011-110, Seattle, WA, November 2011. [Principal author]

Nitterright, F., and Krahe, R., “Development of a Solid Modeling Course for Electrical and Computer Engineering Technology (ECET) Students,” Proceedings, American Society for Engineering Education, Electrical & Computer Engineering Division, AC2009-389, Austin, TX, June 2009.

Nitterright, F. A., “Development of a plastic injection molding processing laboratory for freshman mechanical engineering technologists,” American Society for Engineering Education, Manufacturing Division, 2005-1851, December 2004.

Nitterright, F. A., Fisher, K. J., and Roth, D. E., “Internships and program objectives,” American Society for Engineering Education (ASEE), Engineering Technology Division, Session #1149, Salt Lake City, UT, pp. 1-5, June 2004. [Co-author]

Nitterright, F. A., Roth, J. T., and Weissbach, R. S., “Broadening the scope of a material science course by experimentally testing the effects of electricity on a metallic test specimen’s material properties,” American Society for Engineering Education (ASEE), Materials Division Session #3264, Salt Lake City, UT, pp. 1-9, June 2004. [Co-author]

Nitterright, F. A., Fisher, K. J., and Roth, D. E., “Implementing and managing summer internships at The Pennsylvania State University, The Behrend College for seniors in the Mechanical Engineering Technology Program,” American Society for Engineering Education (ASEE), Engineering Technology Division Session #3149, Montreal, Quebec, June 2002. [Co-author]

Nitterright, F. A., and Fisher, K. J., “Design of an automotive fuel tank test fixture,” American Society of Mechanical Engineers, Anaheim, CA, 92-WA/MET 7, pp. 1-5, November 1999. [Co-author]

Articles published in refereed journals

Sweeney, S., “Determining Isolator Damping for Minimized Response from Impulse: A Theoretical Approach,” SAE International Journal of Commercial Vehicles, vol. 4, no. 1, pp. 155-162, doi: 10.4271/2011-01-2239, October 2011.

Sweeney, S., “Beam deflection using spreadsheet tools for successive integration,” the Technology Interface, The Electronic Journal for Engineering Technology, (http://technologyinterface.nmsu.edu/Spring07, peer-reviewed, on-line journal), ISSN# 1523-9926, vol. 7, no. 2, 9 pp., Spring 2007.

Sweeney, S. K., “Analysis of two-dimensional gage repeatability and reproducibility,” Quality Engineering, vol. 19, no. 1, pp. 29-37, January-March 2007.

Fisher, K. J., Lobaugh, M., Michael, R. M., Sweeney, S. K., and Kuvshinikov, P. J., “Development of a cost model for manual tool polishing,” The International Journal of Modern Engineering (http://www.ijme.us, an international, peer reviewed on-line journal), Spring/Summer 2006.

Sweeney, S., “A dynamics project: quarter-mile time of a dragster,” the Technology Interface, The Electronic Journal for Engineering Technology (http://technologyinterface.nmsu.edu/Spring06, peer reviewed on-line journal), ISSN# 1523-9926, vol. 6, no. 1, 10 pp., Spring 2006.

Sweeney, S. K., “Statistical tolerancing for combinations of coaxial features and clearance fits,” Quality Engineering, vol. 16, no. 1, pp.13-20, 2003.

Articles published in refereed proceedings

Sweeney, S., Lateral Vibration Prediction of Drivelines Having a Flexible Coupling, SAE International, no. 2011-01-2238, September 2011.

Sweeney, S., “Using everyday examples to teach engineering concepts. A dynamics project: quarter-mile time of a dragster,” ENGAGE, an Extension Services project funded by the National Science Foundation, (www.EngageEngineering.org), 11 pp., March 2010.

Sweeney, S. K., Englund, R. B., and Edwards, R. C., “Direct assessment of mechanics of materials learning with concept inventory,” Proceedings of the American Society for Engineering Education Annual Conference, Honolulu, HI, June 2007.

Sweeney, S. K., “Selection and unintended consequences of torsionally flexible couplings in off-highway vehicle and stationary industrial applications,” Proceedings of Society of Automotive Engineers Noise and Vibration Conference, Chicago, IL, 11 pp., May 2007.

Sweeney, S. K., “Suspension component with internal mechanical resonator,” Proceedings of Society of Automotive Engineers Commercial Vehicle Engineering Congress, Commercial Vehicle, Noise, and Vibration and Chassis and Suspension Development, SP-2050, 2006-01-3461, 7 pp., November 2006.

Sweeney, S. K., and Michael, R. J., “Collaborative product realization of an innovative structural damper and application,” Proceedings of ASME International Mechanical Engineering Congress, IMECE2006-13421, 9 pp., November 2006. [Principal author]

Sweeney, S. K., and Berlin, M. B., “Effect of surface processes on high-cycle fatigue life of titanium alloys,” SAE International, 2006-01-3129, September 2006. [Principal-author]

Sweeney, S. K., and Fisher, K. J., “Reduction of rotating imbalance measurement variation resulting from test apparatus redesign,” Proceedings of 2005 ASME International Mechanical Engineering Congress, IMECE-79317, 7 pp., 2005. [Principal author]

Englund, R. B., Sweeney, S. K., and Johnson, D. H., “A demonstration of heat affected zone from welding,” Proceedings of the 2005 American Society for Engineering Education Annual Conference & Exposition, Session 1150-1133, 9 pp., 2005. [Co-author]

Sweeney, S. K., and Michael, R. J., “Collaborative development of a structural damper utilizing ultra-high-damped elastomer,” Proceedings of 2003 ASME International Mechanical Engineering Congress, IMECE2003-42312, 7 pp., 2003. [Principal author]

Sweeney, S. K., Johnson, D. H., and Turso, J. A., “Development of a mechanical vibration course for engineering technologists,” Proceedings of the 2003 American Society for Engineering Education Annual Conference and Exposition, Session 2647-932, 13 pp., 2003. [Principal author]

Sweeney, S. K., “Analysis and discussion of diesel engine powertrain torsional resonance during start-up,” Society of Automotive Engineers Noise and Vibration Conference Proceedings, 2003-01-1721, 12 pp., 2003.

Englund, R. B., Johnson, D. H., and Sweeney, S. K., “A finite element analysis study of nonlinear behavior in a bolted connection,” Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, DE-vol.102, pp. 73-79, 1999. [Co-author]

Sweeney, S. K., and Fisher, K. J., “Using assessment for continuous quality improvement of a materials course in MET,” American Society for Engineering Education North Central Section Annual Meeting, pp. 282-286, 1999. [Principal Author]

Papers refereed by abstract

Proceedings

Fisher, K. J., and Sweeney, S. K. [presenter], “Development of a course in materials selection,” poster presentation, Division of Experimentation and Laboratory-Oriented Studies, American Society for Engineering Education (ASEE), Annual Conference, Milwaukee, WI, 1997. [Co-author]

Articles published in nonrefereed journals

Trade Journals

Sweeney, S., “Smooth Ride,” OEM Off-Highway (http://www.OEMOffHighway.com peer reviewed on-line journal), 3 pp., May 19, 2008.

Articles published in refereed journals

Michael, R. J., Johnson, D., Yantek, D., Ferro, E., and Swope, C., “Development of Elastomeric Isolators to Reduce Roof Bolting Machine Drilling Noise,” Noise Control Engineering Journal (NCEJ), vol. 59, iss. 6, pp. 591-612, November 2011. [Principal author]

Edwards, R., Recktenwald, G., Kuntz, R. and Michael, R., “An Exercise to Teach the First Law of Thermodynamics for an Open System Using a Simple Hair Dryer,” the Technology Interface, The Electronic Journal for Engineering Technology (http://technologyinterface.nmsu.edu/Spring10/, peer reviewed, on-line journal), ISSN# 1523-9926, vol. 10, no. 3, 20 pp., Spring 2010.

Filiarault, A., Courtwright, J. A., Higgins, P. S., Michael, R. J., and Wanitkorkul, A., “Experimental seismic response of base isolated pallet-type steel storage racks,” Earthquake Spektra, (a peer reviewed Earthquake Engineering Research Institute Journal), Spring 2008.

Fisher, K. J., Lobaugh, M., Michael, R. M., Sweeney, S. K., and Kuvshinikov, P. J., “Development of a cost model for manual tool polishing,” The International Journal of Modern Engineering (http://www.ijme.us, an international peer reviewed online journal), Spring/Summer 2006.

Articles published in refereed proceedings

Nitterright, F., Michael, R. J., Murosky, C. J., and Ragen, M.A., “Undergraduate Design: Design of Reusable Stir Friction Welding Tools,” American Society of Engineering Education (ASEE) Annual Conference and Exposition, 7 pp., Vancouver, British Columbia, Canada, June 2011. [Co-author, presented at conference by Nitteright]

Del Vecchio, R. J., Ferro, E., and Michael, R. J., “Effects of Variations in Vulcanization Systems in Natural Rubber,” RubberChem 2010, 8 pp., Vienna, Austria, November 30, 2010.

Michael, R. J., Courtwright, J. A., Ferro, E. B., Filiatrault, A., Higgins, P. S., and Wanitkorkul, A., “Development of a New Base Isolation System for Seismic Isolation of Steel Pallet Storage Racks,” Proceedings, 9th US National and 10th Canadian Conference on Earthquake Engineering (9USN10CEE), 10 pp., Toronto, Ontario, Canada, July 26, 2010.

Lowe, J., Peterson, S., Yantek, D., Alcorn, L., and Michael, R., “Less Sound Underground: Reducing Roof Bolting Machine Drilling Noise”, Proceedings, Acoustical Society of America, 159th Meeting Lay Language Papers (http://www.acoustics.org/press peer reviewed, on-line in World-Wide Press Room), Baltimore, MD, April 21, 2010.

Lowe, J., Peterson, S., Yantek, D., Alcorn, L., and Michael, R., “A Control Suite to Reduce Roof Bolting Machine Drilling Noise,” Noise-Con 2010, 12 pp., Baltimore, MD, April 19, 2010.

Michael, R. J., Yantek, D., Peterson, J., and Ferro, E., “The Evolution of Drill Bit and Chuck Isolators to Reduce Roof Bolting Machine Noise,” Proceedings, 2010 Society for Mining, Metallurgy, and Exploration (SME) Annual Meeting and Exhibition, 9 pp., Phoenix, AZ, March 2, 2010.

Zimmerman, J. J., Smith, A., Michael, R. J., and Kovalchik, P., “Modified Tail Section Reduces Noise on a Continuous Mining Machine,” Proceedings, 2010 Society for Mining, Metallurgy, and Exploration (SME) Annual Meeting and Exhibition, pp. 423-425, Phoenix, AZ, March 2, 2010.

Sweeney, S. K., and Michael, R. J., “Collaborative product realization of an innovative structural damper and application,” Proceedings of ASME International Mechanical Engineering Congress, IMECE2006-13421, 9 pp., November 2006.

Michael, R.J., Roth, D., and Rucksey, R., “The study of a neoprene elevator roller guide,” Proceedings of the ANSYS User’s Conference, 2003/2004.

Sweeney, S.K., and Michael, R.J., in “Collaborative development of a structural damper utilizing ultra-high damped elastomer,” Proceedings of the ASME International Mechanical Engineering Congress, IMECE2003-42312, 7 pp., 2003.

Parts of books

Doyle, J. and Michael, R., Training Manual, ANSYS Mechanical Structural Nonlinearities, Release: 12.1, 1st Edition, Pittsburgh: ANSYS, Inc., February 2010. [Contributing author]

Articles published in nonrefereed journals

Michael, R. J., “Design Summary for All Back-up Chuck Isolators,” Technical design report detailing numerous options for pancake style chuck isolator used on drilling machines at chuck location to reduce noise, National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, December 21, 2010.

Michael, R. J., “Design Review for QC-20377 1 3/8” Drill Bit Isolator,” National Institute for Occupational Safety and Health (NIOSH)/Kennametal, Latrobe, PA, November 27, 2010.

Michael, R. J., “FE Analysis of Modified 50 Frame Vibrator,” JBT Food Services, Chicago, IL, November 14, 2010.

Michael, R. J., “Torsional Stiffness Requirement for Schaublin 477-1155,” Schaublin (Division of Heim Bearing), Horscham, PA, November 1, 2010.

Michael, R.J., “FE Analysis of Epoxy Housing,” PTC/Ansaldo, Pittsburgh, PA, April 29, 2010.

Michael, R. J., “Design and Analysis of Plastic Wheel for Shock Reducing Caster,” Jarvis Corporation, Middletown, CT, November 11, 2009.

Michael, R. J., “Analysis and Testing of GM Body Mount P/N 20898141,” Corry Rubber Corporation, Corry, PA, November 2009.

Michael, R. J., “Executive Summary: UltraTech 2.0 Design Review,” Technical report, detailing recommended materials for seals and other elastomeric components used in a remote control for a Jacuzzi, Emerson Electric, Columbus, OH, July 18, 2009.

Michael, R. J., “TPE Flex Coupler Review,” Technical assessment report, to determine feasibility of converting a elastomeric coupler (garbage disposal) from thermosetting nitrile to a lower cost thermal plastic urethane (TPU), Emerson Electric, Columbus, OH, July 10, 2009.

Michael, R. J., “Design and FE Analysis of 1” Drill Bit and Chuck Isolator for Noise Isolation,” National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, July 2009.

Michael, R. J., “Design and Analysis of a 90 mm High Capacity Elastomeric Laminated Bearing for European High Speed Train Application,” Heim Bearing, Horscham, PA, June 10, 2009.

Michael, R. J., “Development of Drill Bit Isolator for Underground Mining Operations,” National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, November 2008.

Michael, R. J., “Part 2: Design and FE Analysis of Enstrom Elastomeric Laminated Thrust Bearing,” SKF, Jamestown, NY, November 27, 2008.

Michael, R. J., “Design of Plastic Wheel for Shock Reducing Caster,” Jarvis Corporation/Corry Rubber Corporation, Corry, PA, May 2008.

Michael, R. J., “FEA of IAVO Striker in D21 Latch”, FEA of Redesigned Striker to Meet Current L/D Performance (of current design) in D21 Latch,” ITW/Corry Rubber Corporation, Corry, PA, April 2008.

Michael, R. J., “Design and FE Analysis of New Raptor Shock Reducing Caster,” Jarvis Corporation/Corry Rubber Corporation, Corry, PA, February 2008.

Michael, R. J., “Design and FE Analysis of Ford F150/F250 Striker Mount,” ITW/Corry Rubber Corporation, Corry, PA, October 2007.

Michael, R. J., “Design of Elastomeric Rod Ends for Boeing 777 Airframe,” Heim Bearing/Corry Rubber Corporation, Corry, PA, October 2007.

Michael, R. J., “Design of Elastomeric Rod Ends for Boeing 787 Airframe,” Heim Bearing/Corry Rubber Corporation, Corry, PA, October 2007.

Michael, R. J., “Design and FE Analysis of Ford F150/F250 Striker Mount,” ITW/Corry Rubber Corporation, Corry, PA, September 2007.

Michael, R. J., “Design and FE Analysis of Enstrom Elastomeric Laminated Thrust Bearing,” SKF, Jamestown, NY, August 2007.

Michael, R. J., “FE Analysis of Coupler (p/n 74140),” InSinkErator, Milwaukee, WI, April 2007.

Michael, R. J., “Design and Analysis of GMT 900 Stabilizer Bar Bushing,” Corry Rubber Corporation, Corry, PA, October 2004.

Michael, R. J., “Field Test Results for D6 E-Bar Bearing,” LORD Corporation, Erie, PA, May 2004.

Michael, R. J., “Vibration Diagnostic Results for Whirlpool Duet Horizontal Washer,” Corry Rubber Corporation, Corry, PA, February 2004.

Michael, R. J., “Design of Caterpillar Elastomeric Bearing for D6 Equalizer Links,” LORD Corporation, Erie, PA, 40 pp., December 2002.

Michael, R. J., “Design of Engine Mounting System Stewart and Stevenson Military Utility Truck,” LORD Corporation, Erie, PA, 56 pp., 2002.

Michael, R. J., “Design Guidelines for Elastomeric Bearings,” LORD Corporation, Erie, PA, 22 pp., July 2002.

Michael, R. J., “Dynamic Analysis and Stress Analysis of Freightliner 2002 MT45 Radiator Stay Rods,” LORD Corporation, Erie, PA, 5 pp., October 2001.

Michael, R. J., “Non-Linear Finite Element Analysis on Bushing for Freightliner Suspension (IE-01-54),” LORD Corporation, Erie, PA, 12 pp., October 2001.

Michael, R. J., “Dynamic Analysis of Mercury Marine Engine Mount Suspension (IE-01-49),” LORD Corporation, Erie, PA, 30 pp., August 2001.

Michael, R. J., Kuester, U., and Sweeney, S.K., “Design of Engine Mounting System for Mercedes NCV3 Next Generation Utility Vans (IE-01-22),” LORD Corporation, Erie, PA, 100 pp., July 2001.

Michael, R. J., “Finite Element Analysis of Metal Components for NCV3 Engine Mounts (IE-01-18),” LORD Corporation, Erie, PA, 22 pp., July 2001.

Michael, R. J., “Design of Torsional Spring for Dauphin Chair Application (IE-01-12),” LORD Corporation, Erie, PA, 10 pp., May 2001.

Michael, R. J., “Freightliner TufTrac Two-Stage Bearing Feasibility Study (E-00-041),” LORD Corporation, Erie, PA, 10 pp., December 2000.

Michael, R. J., “New Holland L190 Skid Steer Loader Vibration Testing and Modal Analysis (E-00-011),” LORD Corporation, Erie, PA, 12 pp., July 2000.

Michael, R. J., “Walterscheid Drive Shaft Isolator – Design Report (E-99-087),” LORD Corporation, Erie, PA, 12 pp., May 2000.

Articles published in refereed journals

Lasher, W. C., Sonnenmeier, J. R., Forsman, D. R., and Tomcho, J., “The aerodynamics of symmetric spinnakers,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 93, pp. 311-337, 2005.

Forsman, D. R., and Drury, C. G., “Measurement of the speed accuracy operating characteristic for visual search, Ergonomics, vol. 39, no. 1, pp. 41-45, 1996.

Articles published in refereed proceedings

Forsman, D ., “Computer applications for engineers: Teaching organizational, problem solving and checking skills to freshmen engineering technology students,” Proceedings of the American Society for Engineering Education National Conference, AC 2008-3548, 15 pp., 2008.

Forsman, D., “Reverse engineering and rapid prototyping: A senior level technical elective for mechanical engineering technology students and much more,” American Society for Engineering Education National Conference, Session 3438, 14 pp., June 2005.

Lasher, W. C., Sonnenmeier, J. R., Forsman, D. R., Zhang, C., and White, K., “Experimental force coefficients for a parametric series of spinnakers,” Proceedings of the 16th Chesapeake Sailing Yacht Symposium, Annapolis, MD, pp. 153-160, March 2003.

Forsman, D., Holliday-Darr, K., and Lobaugh, M., “Process education in computer graphics,” American Society for Engineering Education, National Conference, CD Index #970, 14 pp., June 2002.

Edwards, R., and Forsman, D., “A rapid prototyping application in wind tunnel testing-a student project,” American Society for Engineering Education National Conference, CD Index #1140, 6 pp., June 2002.

Torres, K., Holliday-Darr, K., Forsman, D., Baird, D., and Johnson, D., “Tech Prep Camp: An engineering technology camp for high school students, exposing students to engineering technology through model rocketry,” 2000 Annual American Society for Engineering Education Conference, Session 3253, St. Louis, MO, June 2000.

Lasher, W. C., and Forsman, D. R., “The engineering workstation laboratory at Penn State Behrend: A case history,” Proceedings of the Ninth Annual Conference on University Programs in Computer-Aided Engineering, Design, and Manufacturing, Provo, UT, 5 pp., 1991.

Forsman, D. R., “Replacing traditional graphics with CAD in MET programs,” Proceedings of the ASME Winter Annual Meeting, Atlanta, GA, 6 pp., 1991.

Book reviews

Forsman, D., Essentials of Pro/ENGINEER, Brooks and Cole: Stamford, CT, March 2000.

Articles published in non-refereed proceedings

Forsman, D., “Use of Z-402 models in an open circuit wind tunnel, three case studies,” Z Corporation User Group Meeting, Bedford, MA, September 2002.

Forsman, D., and Englund, R., “Strength of post processed parts,” Z Corporation User Group Meeting, Bedford, MA, October 2001.

Forsman, D.R., “Using SolidWorks to teach engineering students the basics of technical graphics,” Proceedings of the First International SolidWorks Conference, Palm Springs, CA, 23 pp., 1999.

Forsman, D. R., “Automating the definition of a moving solid volume,” Proceedings of PROfiles, Winter 98-99, vol. 3, no. 2, pp. 13-17, 1998.

Forsman, D. R., “Forging die design using Pro/CDRS,” Proceedings of the 1996 Pro/User International Conference, Anaheim, CA, 11 pp., 1996.

Forsman, D. R., “Teaching users of differing CAD backgrounds the basics of Pro/ENGINEER,” Proceedings of the Fifth Annual Pro/USER Group Conference, San Jose, CA, 22 pp., 1994.

Forsman, D. R., “Teaching and using Pro/ENGINEER in baccalaureate mechanical and plastics engineering technology programs,” Proceedings of the Third Annual Pro/User Group Conference, Orlando, FL, 9 pp., 1992.

Lasher, W., and Forsman, D., “Panel layout design for yacht sails using microcomputers,” Proceedings of the Computer-Aided Drafting on Micros Conference, Farmingdale, NY, pp. 219-225, 1986.

Articles published in refereed journals

Wallace, A., Cooney, T. E., Englund, R., and Lubahn, J. D., “Effects of Interleukin-6 Ablation on Fracture Healing in Mice,” Journal of Orthopaedic Research, vol. 29, no. 9, pp. 1437-1442, September 2011.

Will, R., Englund, R., Lubahn, J., and Cooney, T. E., “Locking plates have increased torsional stiffness compared to standard plates in a segmental defect model of clavicle fracture,” Archives of Orthopaedic and Trauma Surgery, vol. 131, pp. 841–847, 2011.

Lubahn, J., Englund, R., Trinidad, G., Lyons, J., Ivance, D., and Buczek, F., “Adequacy of laboratory simulation of in-line skater falls,” The Journal of Hand Surgery, vol. 30a, no. 2, March 2005.

Keverline, J., Englund, R., and Cooney, T., “Takeoff forces transmitted to the upper extremity during water-skiing,” Orthopedics, vol. 26, no. 7, pp. 707-710, July 2003.

Englund, R., and Weissbach, R., “Interdisciplinary laboratory exercises for the design and construction of an LVDT position measurement system,” Journal of Engineering Technology, 8 pp., 2002.

Parry, B., Ganley, T. J., Bortel, D. T., Englund, R., and Cooney, T., “In vitro analysis of periprosthetic strains following total knee arthroplasty,” Orthopedics, vol. 23, no. 10, pp. 1051-1056, 2000.

Englund, R., and Johnson, D., “Finite element analysis of a threaded connection compared to experimental and theoretical research,” Journal of Engineering Technology, vol. 14, no. 2, pp. 42-47, 1997.

Articles published in refereed proceedings

Sweeney, S. K., Englund, R. B., and Edwards, R. C., “Direct assessment of mechanics of material learning,” Proceedings of the 2007 American Society for Engineering Education National Conference, Honolulu, HI, 2007.

Englund, R., Sweeney, S., and Johnson, D., “A demonstration of heat affected zone from welding”, Proceedings of the 2005 American Society for Engineering Education Annual Conference and Exposition, Session 1150-1133, 9 pp., published on CD, June 2005.

Johnson, D. H., and Englund, R. B., “Mechanical stress relief simulation,” 2004 International ANSYS Conference Proceedings, published on CD-ROM, file: \papers\91.pdf, 13 pp., May 2004.

Evans, E. R., and Englund, R. B., “A bridge to high-school girls: A versatile recruiting tool,” American Society for Engineering Education 2001 Annual Conference & Exposition Proceedings, CD-Rom: Session 3550, 7 pp., 2001.

Englund, R. B., Lubahn, J. D., Buczek, F. L., and Cooney, T. E., “Wrist fracture dynamic testing system to simulate skating falls,” American Society of Mechanical Engineers International Mechanical Engineering Congress & Exposition, paper number BED-4C, 2 pp., 2001.

Englund, R. B., Buczek, F. L., and Cooney, T. E., “Wrist fracture cooperative biomechanics research project,” American Society of Mechanical Engineers International Mechanical Engineering Congress & Exposition, paper number METDH-3, 4 pp., 2001.

Englund, R. B., “Case study for first year seminar – A plan which (mostly) worked,” American Society for Engineering Education 2000 Annual Conference Proceedings, [CD-Rom: Session 2793, file 00055.pdf], 6 pp., 2000.

Johnson, D., Englund, R., McAnlis, B., Sari, K., and Columbet, D., “Three-dimensional modeling of a bolted connection,” 9th International ANSYS Conference and Exhibition, CD Rom: ANSYS 2000 Conference Proceedings, Contact and Impact 1, 6 pp., 2000.

Englund, R., Johnson, D., and Sweeney, S., “A finite element analysis of nonlinear behavior in a bolted connection,” American Society of Mechanical Engineers International Mechanical Engineering Congress & Exposition, DE-102:73-79, 1999.

Englund, R., “Design of bi-directional loadcell for biomechanics measurement,” American Society of Mechanical Engineers International Mechanical Engineering Congress & Exposition, paper number 98-WA/DE-3, 6 pp., 1998.

Taylor, K. D., Buchanan, W. W., Englund, R., O’Connor, T., and Yates, D., “Professional registration issues for engineering technology graduates: A range of perspectives,” Proceedings of Frontiers in Education Conference 1997 ASEE/IEEE, [CD-ROM: FIE97\papers\1146.pdf-5 pages], 1997.

Englund, R., and Grode, J., “Getting more from a manufacturing lab exercise,” Proceedings of the 1993 ASEE North Central Section Annual Conference, pp. 3A-13-18, 1993.

Englund, R., and Freeman, M., “CAM software for an associate degree MET program,” Proceedings of the 1992 ASEE National Conference, pp. 1475-1479, 1992.

Articles published in non-refereed proceedings

Parry, B., Ganley, T. J., Bortel, D. T., Englund, R., and Cooney, T., “In vitro analysis of periprosthetic strains following total knee arthroplasty,” Hamot Medical Center, Orthopaedics and Research Departments, Hamot Research Day, 23 pp., 1997.

Englund, R., “Engineering technology experience with distance education,” Proceedings of the 18th International Council for Distance Education World Conference, University Park, PA, [CD-ROM: ICDE-CD\papers\red\r8englun.pdf-10 pp.], 1997.

Ganley, T. J., Parry, B., Englund, R., and Cooney, T., “In vitro strain analysis and fracture patterns associated with total knee arthroplasties phase I: Development of the impact system,” Hamot Medical Center, Orthopaedics and Research Departments, Hamot Research Day, 18 pp., 1995.